EXTERNAL PHYSICAL PROTECTION

Lightning Protection Systems

Direct lightning strikes carry peak currents often exceeding 100kA with rise times under microseconds. Our engineered lightning protection solutions intercept this tremendous atmospheric discharge at preferred points and safely convey it to ground without dangerous sparking, flashover, or structural fire.

The External Lightning Protection Architecture

An external lightning protection system (LPS) consists of three interconnected subsystems: air-termination conductors or active ESE terminals positioned at the highest elevations, down-conductors routing high-voltage discharge down the structure via low-impedance paths, and an earth-termination network dissipating electrical energy safely into the mass of earth.

We supply and install both conventional Faraday cage/mesh systems conforming to IEC 62305-3 and Early Streamer Emission (ESE) technologies such as WAT Franklin Plus and INGESCO PDC AIR.

Site-specific evaluations account for structural height, geographic flash density in Kerala, building geometry, flammable roof materials, and nearby electrical services to ensure reliable interception efficiency.

Core Principles of Safe Interception & Conduction

Controlled Air InterceptionTerminals positioned via the rolling sphere or angle method intercept downward lightning leaders before vulnerable structural edges are struck.
Low-Impedance Down ConductionHigh-purity annealed copper or aluminum conductors arranged symmetrically with straight runs avoid inductive choking and side-flashes.
Rapid Earth DissipationInterconnected low-resistance earthing grids equalize ground potential rise and conduct high transient energies away from foundations.
Equipotential Structural BondingConductive building elements, rebar grids, and service entries are bonded to eliminate hazardous potential differences.
REFERENCE STANDARDS
  • IEC 62305-3
  • IS/IEC 62305
  • UNE 21186
  • NFC 17-102

System designs follow applicable prescriptive guidelines of national and international standards.

TYPICAL INSTALLATIONS
  • High-rise residential and commercial towers
  • Industrial manufacturing plants and processing units
  • Rooftop and ground-mounted solar PV installations
  • Telecommunications towers and radar installations
  • Temples, churches, mosques, and heritage structures
  • Educational institutions and healthcare facilities
ENGINEERED HARDWARE

Applicable Lightning Protection Hardware

View All Catalogue →
WAT Franklin Plus Stainless Steel Active Lightning Terminal
Lightning ProtectionWAT Franklin

WAT Franklin Plus

High-grade stainless-steel active lightning conductor utilizing natural atmospheric electric field energy to generate early streamer emissions.

Autonomous electrostatic field activation without battery or auxiliary power
Engineered from 316L / austenitic stainless steel for high chemical and marine resistance
INGESCO PDC AIR Early Streamer Emission Lightning Rod
Lightning ProtectionINGESCO

INGESCO PDC AIR Lightning Rod

Early Streamer Emission (ESE) air terminal designed to create an upward connecting leader and expansive protection radius conforming to UNE 21186 & NFC 17-102.

100% efficient discharge initiation based on electronic atmospheric field sensing
Manufactured completely with AISI 316L stainless steel
High-purity electrolytic copper tape down conductor systems
ConductorsRescue Electric

Copper Down Conductor System

Engineered high-purity electrolytic copper tapes (20×3, 25×3, 32×6 mm) for low-impedance down-conduction and earthing grids.

Manufactured from 99.9% electrolytic grade high-conductivity copper
Available in bare annealed copper or lead/tin-coated finishes for harsh atmospheres
CERTIFIED ELECTRICAL DEFENSE

Don’t Wait for the Next Storm.

Talk to Rescue Electric Company about lightning protection, surge protection and advanced earthing for your property or project anywhere in Kerala.

DIRECT TELEPHONE: +91 94963 80272•WHATSAPP: +91 89211 94647